East Coast

Toilet accessories, Grab Bars, ADA Signs

Toilet compartments

Compartment hardware

Laminate Commercial Cabinets

Soap       

MODEL B01-6324 - Counter Mounted

Pump Type Valve - 4" Spout - 4-3/4" Shank

Overall dimensions: 2-3/4" above counter. 4" Spout

Construction- PLUNGER AND SPOUT fabricated of type 316 stainless steel.

ESCUTCHEON manufactured of heavy chrome plated brass.

SHANK manufactured out of molded ABS plastic.

VALVE CYLINDER manufactured out of molded clear ABS plastic.

VALVE COMPONENTS are manufactured out of Celcon, Buna-N rubber or stainless steel.

PLASTIC GLOBE manufactured out of translucent polyethylene.

Capacity - 16 0z. liquid soap.

Operation - Depress piston for measured amount of liquid soap.

Fills from top by unlocking and withdrawing piston and spout assembly using special key provided.

The 6324 will dispense vegetable or coconut oil liquid soaps, synthetic detergents, and antiseptic solutions in a liquid form. Spout rotates 360°.

Installation - Mount dispenser in 1" diameter hole in lavatory or counter-top. Include dispenser mounting hole location in lavatory specifications or mount in unused faucet hole. Shank will accommodate a maximum 4" mounting thickness and can be cut in the field.

Top of Page         ---------         Return to Soap & Mirrors Page

MODEL B01-657 Surface Mounted  

Urn Type Liquid Soap Dispenser

Overall dimensions: 3-3/16"W x 6"H x 5-7/8"D

(from wall to end of valve).

Construction - CONTAINER CASE of high polish chrome plated brass. Filler hole cover secured to unit with chain.

SOAP CONTAINER is plastic.

SOAP VALVE piston assembly of chrome-plated plastic.

Rear valve assembly of Delrin with Neoprene seal.

WALL PLATE is full length, heavy gauge plated steel.

Capacity - 12 oz. liquid soap.

Operation - Pump type valve dispenses a measured amount of liquid soap with each stroke.

Viewing slots in case reveal soap level. Filler hole cover, with locking chain, requires special wrench to open.

NOTE: Bradley liquid and lather soap valves operate best with any vegetable oil or

Coconut oil hand soap having a 10 to 15 percent soap concentration.

Installation - Secure separate mounting bracket to wall. Attach soap dispenser.

Top of Page         ---------         Return to Soap & Mirrors Page

MODEL B01-6542 - Surface Mounted

Tank Type – Horizontal

Overall dimensions: 8-3/16"W x 4-7/8"H x 2-7/8"D

Construction - BODY fabricated of type 304 (18-8), 20 gauge stainless steel with exposed

surfaces in architectural satin finish.

BACK fabricated of type 304 (18-8), 20 gauge stainless steel. Heliarc welded to

the body.

WALL PLATE of heavy gauge stainless steel.

SOAP VALVE has chrome plated brass housing with ABS plastic mechanism.

Capacity - 40 oz. liquid soap.

Operation - Push-in valve dispenses measured amount of vegetable or coconut oil liquid soaps,

synthetic detergents, and antiseptic solutions. Locked filler top opens with special key

provided.

INSTALLATION - Secure separate mounting bracket to wall. Slide dispenser into place and secure

locking screw through filler hole.

Top of Page         ---------         Return to Soap & Mirrors Page